Item specifics:

PCB Prototype service support

• 100% Electronic test
• No Minimum Order
• Prototype as quick as one day
• Paypal accepted for low-volume

Start with prototype quantities and continue with us to ramp up production level quantities

For PCB prototyping, we are able to manufacture low volume single and double-sided PCBs to complex multilayer PCBs with blind and buried vias at affordable prices.

We supply the fast prototyping service with 24 hours(2 layers) /48 hours(4 layers).
Prototyping stage is the most critical period of time for engineers, students and hobbyists. We not only makes your boards quick, but also makes your job right as well as cost-effective. This greatly reduces your cost and shorten the time for developing your electronic products.
The economical solution for circuit board prototypes with 1, 2, 4, 6, 8 or 10 layers, and a small overall area.

PCB Capabilities – Quick-turn PCB

Items		Manufacturing Capabilities	Remarks
Number of Layers		1-10 layers	For orders above 10 layers,please view the below “Standard PCB” or contact our sales rep.
Material		FR-4,Aluminum	For Flex, Rigid-flex, Metal-based (Aluminum etc.,), HDI, Halogen-free, High Tg, etc.,please view the below “Standard PCB” or contact sales rep.
Maximum PCB Size(Dimension)		500*1100mm (min 5*6mm)	Any sizes beyond this dimension, please view the below “Standard PCB” or contact sales rep.
Board Size Tolerance(Outline)		±0.2mm/±0.5mm	±0.2mm for CNC routing, and ±0.5mm for V-scoring.
Board Thickness		0.2-2.4mm	0.2,0.4, 0.6, 0.8, 1.0, 1.2, 1.6, 2.0, 2.4mm. Please view the below “Standard PCB” or contact us if your board exceeds these.
Board Thickness Tolerance(t≥1.0mm)		±10%	Normally “+ Tolerance” will occur due to PCB processing steps such as electroless copper, solder mask and other types of finish on the surface.
Board Thickness Tolerance(t<1.0mm)		±0.1mm
Min Trace		0.1mm/4mil	Min manufacturable trace is 4mil(0.1mm), strongly suggest to design trace above 6mil(0.15mm) to save cost.
Min Spacing			Min manufacturable spacing is 4mil(0.1mm), strongly suggest to design spacing above 6mil(0.15mm) to save cost.
Outer Layer Copper Thickness		1oz/2oz/3oz(35μm/70μm/105μm)	Also known as copper weight. 35μm=1oz, 70μm=2oz, 105μm=3oz. Please view the below “Standard PCB” or contact us if you need copper weight greater than 3oz.
Inner Layer Copper Thickness		1oz/1.5oz(35μm/50μm)	Inner copper weight as per customer’s request for 4 and 6 layers, Please contact us if you need copper weight greater than 1.5oz.
Drill Sizes (CNC)		0.2-6.3mm	Min drill size is 0.2mm, max drill is 6.3mm. Any holes greater than 6.3mm or smaller than 0.3mm will be subject to extra charges.
Min Width of Annular Ring		0.15mm(6mil)	For pads with vias in the middle, Min width for Annular Ring is 0.15mm(6mil).
Finished Hole Diameter (CNC)		0.2mm-6.2mm	The finished hole diameter will be smaller than size of drill bits because of copper plating in the hole barrels
Finished Hole Size Tolerance(CNC)		±0.08mm	For example, if the drill size is 0.6mm, the finished hole diameter ranges from 0.52mm to 0.68mm will be considered acceptable.
Solder Mask		LPI	Liquid Photo-Imageable is the mostly adopted. Thermosetting Ink is used in the inexpensive paper-based boards.
Minimum Character Width(Legend)		0.15mm	Characters of less than 0.15mm wide will be too narrow to be identifiable.
Minimum Character Height (Legend)		0.8mm	Characters of less than 0.8mm high will be too small to be recognizable.
Character Width to Height Ratio (Legend)	-	1:5	In PCB silkscreen legends processing, 1:5 is the most suitable  ratio
Minimum Diameter of Plated Half Holes		0.6mm	Design Half-Holes greater than 0.6mm to ensure better connection between boards.
Surface Finishing		HASL with lead HASL lead free Immersion gold,OSP	The most popular three types of PCB surface finish. Please view the below “Standard PCB” or contact us for other finishes.
Solder Mask		Green ,Red, Yellow, Blue, White ,Black	No extra charge (Green, Red, Yellow, Blue)
Silkscreen		White, Black, None	No extra charge.
Panelization		V-scoring, Tab-routing, Tab-routing with Perforation (Stamp Holes)	Leave min clearance of 1.6mm between boards for break-routing. For V-score panelization, set the space between boards to be zero.
Others		Fly Probe Testing (Free) and A.O.I. testing(free), ISO 9001:2008 ,UL Certificate	No extra charge.

Testing Procedures

We perform multiple quality assurance procedures before shipping out any PCB board. These include:

• Visual Inspection
• Flying probe
• Bed of nails
• Impedance control
• Solder-ability detection
• Digital metallograghic microscope
• AOI (Automated Optical Inspection)

Quick turn lead times

For single and double-layer prototype board , we can provide 24 hour turn around times. For multilayer PCBs, the fastest turnaround time depends on the number of layers and quantity.

Service Guarantee:

We make sure to serve each customer professionally, truthfully and friendly to the best of our ability.  We will gladly re-work your project if your project isn’t 100% satisfactory.