Welcome to Shenzhen Hengda Electronics Limited

PCB Capability

PCB Production ilana

01

02_ 副本 03_ 副本

 

 

Standard PCB Agbara - Standard PCB

Àwọn ẹka No. awọn ohun PCB ilana sile awọn ifiyesi
deede ilana alabọde isoro ga isoro  
Ti kii-bošewa awotẹlẹ Lagbara lati ṣe  
ọja iru 1 Multilayer PCB fẹlẹfẹlẹ 3L≤Layers≤16L 18L≤Layers≤24L ≥24L    
2 Afọju si sin Vias HDI (1 + 1 + .... + N + ...... + 1 + 1) Anylayer HDI HDI (2 + ... + N ... + 2)   Ti o ba ti pade awọn ibeere ti 2, 6, ki o si 19 ni akoko kanna, o ti wa ni classified bi a ga ibeere ọja (sisanra to opin ratio, Ejò sisanra ti iho)
3 dada bo HASL (+ goolu ika), immersion wura, immersion Gold + goolu ika pẹlu lile wura, OSP (+ goolu ika pẹlu lile wura), immersion Tin (+ goolu ika pẹlu lile wura) (Ko meji ti o yatọ dada pari), immersion Tin Agbegbe immersion wura (gun tabi kukuru goolu ika, segmented goolu ika iṣẹ) Koja yi ibiti beere unconventional gbóògì lakọkọ   Apa kan immersion wura, sisanra ti wura tabi nickel tọka si awọn sisanra ti awọn ti a bo
4 Board elo FR-4; aluminiomu, Rogers4 jara + FR-4 adalu (The Prepreg ni ShengYi brand ati ROGERS4403 jara); CEM-3, LianMao IT158 / IT180A Pure ROGERS4 jara olona-Layer ọkọ (Prepreg ni 4450F), ptfe, aluminiomu + FR4, Ptfe + FR4 Koja yi ibiti beere unconventional gbóògì lakọkọ Pure ptfe olona-layer ọkọ Pure ptfe ko le ṣee ṣe nitori awọn lamination otutu ni ko soke to bošewa, le ko laminate Rogers Ejò bankanje taara
drills 5 lu opin NC lu 0.20mm≤Drill diameter≤6.5mm Die e sii ju 6.0mm lilo CNC milling
iho opin 0.2mm: o pọju ọkọ sisanra 1.6mm
iho opin opin 0.25mm: o pọju ọkọ sisanra 2.0mm,
iho opin 0.3mm≤Ф≤0.35mm, o pọju ọkọ sisanra 3.2 mm,
iho opin 0.4mm≤Ф≤0.55mm, o pọju ọkọ sisanra 4.8 mm,
iho opin> 0.55mm o pọju ọkọ sisanra 6.4 mm
6.5mm tabi diẹ ẹ sii ± 0.1mm ≤ iho opin ifarada (lilo CNC milling fun 6.5mm tabi diẹ ẹ sii) Awọn lu opin diẹ ẹ sii ju 6.0mm, awọn iho opin ifarada kere ju ± 0.1mm. Ti o ba ti koja yi ibiti o beere unconventional gbóògì lakọkọ   Lu opin ni isalẹ 0.2mm, ati awọn aspect ratio≥10, ti o jẹ alabọde isoro
6 Sisanra to opin ratio Sisanra to opin ratio≤8 8 10 Sisanra to opin ratio tobi ju 12 nigbati awọn iho ko le wa ni san owo Ti o ba ti nilo lati pade awọn ibeere ti 2, 6, ki o si 19, o yoo jẹ itọju bi ga ibeere ọja.
7 countersink iho opin 3.0mm≤hole diameter≤6.5mm   Unconventional gbóògì kọja yi ibiti o   Countersink ijinle ifarada ti wa ni dari 0.15mm
igun 90 °   Unconventional gbóògì kọja yi ibiti o  
8 Iho ipo tolerances ± 0.075mm   ± 0.05mm <+ />-0.05mm  
9 iho opin ifarada PTH ± 0.075mm tabi ko si onibara awọn ibeere ± 0.05≤ iho opin ifarada <± 0.75mm <± 0.05mm <+ />-0.05mm Metallized iho opin ifarada ti 6.0mm tabi diẹ ẹ sii ntokasi si ibeere ti nọmba ni tẹlentẹle 5
NPTH ≥ ± 0.075mm   <± 0.05mm <+ />-0.025mm
Special iho pressfit ≤ ± 0.05 \ \    
ti kii-palara Countersink / Counterbore ihò (NPTH) iho opin <10mm: ifarada ± 0.15mm, iho = ± 0.15mm, iho opin = opin ≥10mm: ifarada = ≥10mm: ifarada ± = ± 0.20mm = 0.20mm \ \    
ti kii-palara Countersink / Counterbore ihò (NPTH) iho opin <10mm: ifarada ± 0.2mm = ± 0.2mm
iho opin ≥10mm: ifarada + 0.3mm
\ \    
10 Iho to iho aye paati iho ≥10MIL 8≤Hole to iho spacing≤10 7≤Hole to iho spacing≤8 <7mil  
via (≤0.45mm) ≥8MIL        
11 Iho (Ge-jade) Iho iwọn Palara Iho ≥0.5mm
Non-palara Iho ≥0.8mm
\ \   Die e sii ju 1.0mm, le jẹ Iho nipa ẹrọ
Ipari to iwọn ipin ti Iho Ipari to width≥2 Ipari to iwọn <2      
12 Castellated Ihò Castellated Ihò opin ≥0.5mm 0.5mm> diameter≥0.4mm \    
Castellated Ihò aye (eti to eti) ≥0.3mm 0.3mm> diameters≥0.2mm \    
  13 Kere ipinya oruka of Inner Layer,
The aaye laarin awọn kere iho ninu Inner Layer ati Circuit (ṣaaju ki biinu)
4L ≥7MIL 6MIL≤isolation oruka, ijinna <7mil 5MIL≤isolation oruka, ijinna <6mil   Ti o ba ti awọn iwọn ti ọkan ẹgbẹ tobi jù 600MM, awọn akojọpọ iho to ila ati awọn iho to Ejò aye gbọdọ jẹ tobi ju tabi dogba si 15mil. Ti o ba ti kere ju 15mil, o gbodo le ṣe mu bi unconventional awotẹlẹ. Mora ilana ti 10 fẹlẹfẹlẹ tabi diẹ ẹ sii nilo lati wa ni incremented nipa 1 mil fun kọọkan afikun 2 fẹlẹfẹlẹ. Yi ipinya oruka to 12mil tabi diẹ ẹ sii bi Elo bi o ti ṣee
  6L ≥8MIL 6.5MIL≤isolation oruka, ijinna <8mil 6MIL≤isolation oruka, ijinna <6.5mil  
  8L ≥9MIL 7MIL≤isolation oruka, ijinna <9mil 6MIL≤isolation oruka, ijinna <7mil  
  ≥10L ≥10MIL 8MIL≤isolation oruka, ijinna <10mil <9MIL 7MIL≤isolation oruka, ijinna <8mil  
image gbigbe 14 Awọn min iwọn / aye ti akojọpọ Layer (ṣaaju ki biinu) Cooper sisanra 18um ≥4 / 4 mil ≥4 / 3.5 mil   <3.5 /> 3 mil iwọn / aye
Cooper sisanra 35um ≥4 / 5 mil ≥4 / 4 mil   <3.5 /> 4 mil iwọn / aye
Cooper sisanra 70um ≥6 / 8mil ≥6 / 7mil   <5 /> 6 mil iwọn / aye
Cooper sisanra 105um ≥8 / 11 mil ≥8 / 10 mil   <6 /> 9 mil iwọn / aye
15 Awọn min iwọn / aye ti lode Layer (ṣaaju ki biinu) Cooper sisanra 18um ≥4 / 5 mil ≥4 / 4 mil tabi awọn ẹya 3.5 / 3.5mil   <3.5 />3.5 mil Agbegbe 3.5 / 3.5mil, nikan ni ijinna lati GBA ërún agbegbe ila si pad
Cooper sisanra 35um ≥5 / 6 mil ≥5 / 5 mil   <4 /> 4 mil  
Cooper sisanra 70um ≥7 / 8mil ≥6 / 7mil   <5 /> 6 mil  
Cooper sisanra 105um ≥10 / 12 mil ≥8 / 10 mil   <6 /> 9 mil  
16 akoj kakiri iwọn / aye Cooper sisanra 18um ≥7 / 9 mil ≥6 / 8 mil   <6 /> 7 mil  
Cooper sisanra 35um ≥9 / 11 mil ≥8 / 10 mil   <8 /> 9 mil  
Cooper sisanra 70um ≥11 / 13mil ≥10 / 12mil   <10 /> 11 mil  
Cooper sisanra 105um ≥13 / 15 mil ≥12 / 14 mil   <12 /> 13 mil  
17 Kere weld oruka (lode Layer) Cooper sisanra 18um via iho ≥5mil ≥4mil <3 mil = mil    
paati iho ≥8mil ≥6mil <6 mil = mil    
Cooper sisanra 35um via iho ≥5mil ≥4mil <3 mil = mil    
paati iho ≥10mil ≥8mil <8 mil = mil    
Cooper sisanra 70um via iho ≥7mil ≥6mil <5 mil = mil    
paati iho ≥12mil ≥10mil <10 mil = mil    
Cooper sisanra 105um via iho ≥8mil ≥6mil <6 mil = mil    
paati iho ≥14mil ≥12mil <12 mil = mil    
18 iwọn ifarada   iwọn ifarada: ≥ ± 20% ± 10% ≤ iwọn ifarada: <± 20% <± 10%   aye gbọdọ pade awọn ibeere ti 11 ati 12, lf iwọn jẹ tobi ju 15mil, dari nipa ± 2.5mil
BGA pad opin gbona air ni ipele (atilẹba) ≥12MIL ≥10MIL   <8mil  
immersion wura (atilẹba) diameter≥11mil 8.0mil≤diameter <11.0mil   <6mil  
19 Line to ọkọ eti ijinna CNC milling 0.25mm 0.20mm <0.20mm    
SMT iwọn   ≥12mil ≥9mil <9mil 以下   <7mil, bikoṣe awọn = awọn abuda = abuda ọkọ = ọkọ
irin bar 20 Bar Sisanra (μin) Electroless nickel-immersion Gold, ENIG nickel sisanra 100-150 μin 200 μin      
goolu sisanra 1-8 μin     > 8 μin  
Full ọkọ goolu bar nickel sisanra 100-150 μin   200-500 μin   Bere fun ile-ṣayẹwo awọn ik owo
goolu sisanra 1-10 μin 10-50 μin   > 50 μin
goolu ika nickel sisanra 120-150 μin   200-400 μin  
goolu sisanra 1-30 μin 30-50 μin   > 50 μin
21 Iho Ejò sisanra (μm) nipasẹ iho 18-25 μm 30-50 μm > 50 μm   Ti o ba ti 2,6,19 ni ti a beere lati tẹlẹ ni akoko kanna, o yoo le ṣe mu bi ga ibeere. Awọn sisanra ti awọn Ejò jẹ 25-50UM, ati awọn sisanra ti awọn Ejò ni ti a beere lati wa ni 2-3OZ gbogbo.
Afọju iho (darí iho) 18-25 μm 30-50 μm > 50 μm
sin iho 15-25 μm 30-50 μm > 50 μm
22 Isalẹ Ejò sisanra Akojọpọ ki o si lode Ejò sisanra (iwon) 0.5-4 4-6   > 6  
solder boju 23 solder boju alawọ ewe solder boju šiši (mil) ≥2mil 1.5 1   1mil ti wa ni nikan ni ogidi ninu awọn BGA agbegbe. Ti o ba ti window le ti wa ni fífẹ, mu o bi Elo bi o ti ṣee, ṣugbọn awọn ti o pọju ni 3mil
alawọ ewe solder boju Bridge (mil) Cooper thicknesss <2oz 4 (aye laarin awọn ICS jẹ 8 mil, alawọ ewe epo), variegated tabi dudu oil≥4.5mil 3-4 (aye laarin awọn ICS ni 7-8 mil, alawọ ewe epo), variegated tabi dudu oil≥4mil      
Cooper thicknesss≥2OZ 5 4      
Plug iho opin 0.20mm≤hole diameter≤0.40mm, plug iho fullness 70% 0.4mm <iho opin ≤0.70mm fullness 100%    
Plug iho ọkọ sisanra 0.40mm≤board thickness≤2.4mm > 2.4MM      
24 solder boju solder boju awọ Green, Matt alawọ ewe, bulu, pupa, dudu, matte dudu, funfun, ofeefee \ \   Special awọn awọ nilo lati wa ni ra tabi ransogun ni ilosiwaju
silkscreen 25 Etched silkscreen (pari Ejò sisanra) Ejò sisanra 18um ọrọ iwọn / ọrọ iga 8MIL / 40MIL 7MIL / 35MIL      
Ejò sisanra 35um ọrọ iwọn / ọrọ iga 9MIL / 40MIL 8MIL / 35MIL      
Ejò sisanra 75um ọrọ iwọn / ọrọ iga 12MIL / 60MIL 10MIL / 50MIL      
Ejò sisanra 105um ọrọ iwọn / ọrọ iga 16MIL / 60MIL 14MIL / 50MIL      
ìla 26 O pọju ọkọ sisanra Double PCB 3.2MM 4.5MM > 4.5MM   iṣiro nipa 4 fẹlẹfẹlẹ ti o ba ti awọn sisanra diẹ ẹ sii ju 3mm
Multilayer Layer ọkọ 3.2MM 4.5MM > 4.5MM    
27 Kere ọkọ sisanra (nikan ati ki o ė nronu ntokasi si sobusitireti sisanra) Nikan tabi Double ẹgbẹ PCB (PCB Afọwọkọ) ≥0.3mm 0.25mm      
4L ≥0.60mm 0.40mm <0.40mm    
6L ≥0.9mm 0.70mm <0.70mm    
8L ≥1.20mm 1.00mm <1.00mm    
10L ≥1.40mm 1.20mm <1.20mm    
12L ≥1.70mm 1.50mm <1.50mm    
14L ≥2.00mm 1.80mm <1.80mm    
28 sisanra (T) ifarada Mm (multilayer Layer PCB) T≤1.0 ± 0.10   Ye lati awotẹlẹ ti o ba ti kere ju ni ifarada   Ti o ba ti ifarada ni ẹsẹ ifarada, ni ifarada yio jẹ ė ifarada iye, gẹgẹbi: 1.8mm nbeere rere ifarada, ni ifarada yio jẹ 0-0.36mm
1.0 <t≤1.6 <td = ""> ± 0,13  
1.6 <t≤2.5 <td = ""> ± 0.18  
2.5 <t≤3.2 <td = ""> ± 0,23  
T≥3.2 ± 8%  
29 O pọju pari ọkọ iwọn Single ati ki o ė ẹgbẹ PCB 508 × 610mm Beyond yi ibiti o nilo lati wa ni àyẹwò    
Multilayer Layer PCB 508 × 600mm
30 Kere pari PCB iwọn   ≥20mm 10mm≤Size <20mm <10mm    
31 Beveling fun wura ika bevel igun 20 ° 30 ° 45 ° 60 °   <20 ° tabi> 60 °    
Bevel igun ifarada > ± 5 ° ± 5 ° <± 5 °    
Bevel ijinle ifarada tolerance≥ ± 0.15mm ± 0.15mm <ifarada ≤ ± 0.1mm ifarada <± 0.10mm    
32 apẹrẹ ifarada   tolerance≥ ± 0.15mm ± 0.10mm≤tolerance <± 0.15mm   Ifarada <± 0.10mm tabi = tabi diẹ ẹ sii = diẹ ẹ sii ju = ju meji = meji fọọmu = fọọmu fọọmu = fọọmu fọọmu = fọọmu fọọmu = fọọmu fọọmu = fọọmu fọọmu = fọọmu fọọmu = fọọmu fọọmu = fọọmu ifarada = ifarada iṣakoso = Iṣakoso  
33 V-ge igun 20 ° 30 ° 45 ° 60 °        
Awọn pọju nọmba ti V-ge Ni 20 ni igba Ni 30 igba Ni 40 igba    
Iwọn ti awọn apẹrẹ 80MM <iwọn <560mm 60mm <iwọn <80mm iwọn <60mm    
ọkọ sisanra 0.6MM ≦ sisanra ≦ 2.4MM 0.5MM ≦ sisanra <0.6mm sisanra <0.5mm tabi = tabi sisanra = sisanra> 2.4MM   ni isalẹ 0.5mm jẹ nikan-apa V-ge
ti o ku sisanra ≥0.25MM     <0.25mm  
V-ge Mora V-CUTT, V-ge: Rekọja V-ge \ \    
awọn miran 34 panel iwọn Awọn kere nronu iwọn ≥100 * 120mm \ <100 * 120mm   Awọn sisanra ti awọn ti pari ọkọ ni kere ju 0.4MM, awọn nronu iwọn ko ba le koja 14inch, ati awọn ti o pọju iwọn ti awọn HASL PCB le ko koja 24inch
awọn O pọju nronu iwọn ≤20 * 24 inch \ Ye lati awotẹlẹ ti o ba ti kọja ibiti o  
35 ikọjujasi Iṣakoso Ikọjujasi Iṣakoso ifarada ± 10%, 50Ω ati ni isalẹ: ± 5Ω \ <± 10%, 50ω ati = ati ni isalẹ = ni isalẹ <± 5Ω    
ọrun ati lilọ ọrun ati lilọ ifarada ọrun ati twist≥0.75% 0.75% ≤bow ati twist≤0.5% ọrun ati lilọ <0,5%   asymmetry lọọgan teriba ati lilọ ifarada 1.2%
36 HASL processing agbara paati iho opin iho opin> 0.5mm 0.4mm≤hole diameter≤0.5mm      
ọkọ sisanra 0.5mm≤board thickness≤3.5mm 0.4mm≤board sisanra <0.5mm      
sisanra 2um≤thickness of Tin≤30um \ \    
37 gba Àwárí IPC boṣewa IPC2 ipele bošewa IPC Ipele 3 boṣewa